Gadget title

Choose what to display in the title bar of the gadget.

Data source

Select the type of Data source used by the gadget:

• The agile Board of your team.

• A Saved filter containing the issues for which you want the metrics to be calculated. Make sure that the specified filter is shared with the users who will also visualize this gadget. Check Include the sub-tasks if you want the sub-tasks from the selected board or filter to be included in the calculation.

• A JQL query that returns the issues you want to be processed by the gadget.

Split range criteria

Choose how to define the segmented columns (bins). If you choose Attempt to split in ? equal intervals, the gadget will try to divide the range in equal intervals, although it is not always possible to split in the number of intervals that you specified. So the number that you enter is actually a "desired" number. If you choose Split by using these custom thresholds, the range will be divided according to the entered thresholds. In this case, you must manually introduce the thresholds separated by a comma (for example: 100, 200, 300, 400, 500).

Cycle starts

Indicates what to consider as the start event of a cycle.

You can choose between:

• When the issue was created

• When the issue entered a status that has category "New" - the cycle starts when the issue is transitioned to any workflow status of category "New". This includes those gray-colored statuses from Jira, like New, Backlog or To Do.

• When the issue entered a status that has category "In Progress" - the cycle starts when the issue is transitioned to any workflow status of category "In Progress". This includes those blue-colored statuses from Jira, like In Work, In Progress or In Testing.

• When the issue entered this status - cycle starts when the issue was transitioned to the specified workflow status.

Choose also how to handle the case when there are multiple transitions to the start status or to the status category by setting If multiple entries in the start status, consider the ? entry to first or last. See the example below.

Example
You configured the gadget to start the cycle When the issue entered a status that has category "In Progress" and to end the cycle When the issue entered a status that has category "Done" and there was a Jira issue that had multiple entries in the "In Progress" status before being moved to "Done". How should the cycle time be calculated, from the first or from the last transition in the "In Progress" status?

If you set If multiple entries in the start status, consider the first entry, the cycle will start when the issue was transitioned to the "In Progress" status for the first time.

If you set If multiple entries in the start status, consider the last entry, the cycle will start when the issue was transitioned to the "In Progress" status for the last time.

Cycle ends

Indicates what to consider as the end event of a cycle.

You can choose between:

• When the issue entered a status that has category "Done" - the cycle ends when the issue was transitioned to any workflow status of category "Done". This includes those green-colored statuses from Jira, like Done, Resolved or Closed.

• When the issue entered a status that has category "In Progress" - the cycle ends when the issue was transitioned to any workflow status of category "In Progress". This includes those blue-colored statuses from Jira, like In Work, In Progress or In Testing.

• When the issue entered this status - the cycle ends when the issue was transitioned to the specified workflow status.

You can also choose how to handle the case when there are multiple transitions to the end status by setting If multiple entries in the end status, consider the ? entry to first or last. See the example below.

Example
You configured the gadget to start the cycle When the issue entered a status that has category "New" and to end the cycle When the issue entered a status that has category "Done" and there is a Jira issue that had multiple entries in the "Done". How should the cycle time be calculated, till the first or till the last transition in the "Done" status?

If you set If multiple entries in the end status, consider the first entry, the cycle will end when the issue was transitioned in the "Done" status for the first time.

If you set If multiple entries in the end status, consider the last entry, the cycle will end when the issue was transitioned in the "Done" status for the last time.

Multiple cycles

Decide how the gadget should handle those Jira issues that have multiple cycles. This situation occurs if the issue was transitioned multiple times through the start and the finish statuses of the cycle.

Example
You configured the gadget to start the cycle When the issue entered a status that has category "In Progress" and to end the cycle When the issue entered a status that has category "Done" and there was a Jira issue that was moved from "In Progress" to "Done" multiple times, so it had multiple cycles. What cycle do you want to be displayed?

You can choose between:

• Display all cycles - all the cycles will be displayed with their own dot in the plotting chart and their own entry in the data table.

• Display only the first cycle - only the first cycle of the issue will be displayed, with all the others being ignored

• Display only the last cycle - only the last cycle of the issue will be displayed, with all the others being ignored

• Display as one cycle from the start time of the first cycle to the finish time of the last cycle - a single cycle will be displayed, having as the start time the moment when the first cycle started and as the finish time the moment when the last cycle ended. See the picture below.

Time interval

Represents the time interval displayed by the gadget.

You can choose from multiple options:

Custom dates - choose this option if you want to manually enter a Start date and an End date.

A number of days back - By choosing this option, the gadget will use a rolling time interval with a number of days back to the current day.

Dates of a project release - Choose this option if you want the gadget to use the start and end dates of an existing project release (added on the Releases page of a Jira project). Make sure the selected release has a Start date and End date set. Any subsequent changes to the release dates made on the project's Releases page will be automatically reflected in the gadget, without the need to reconfigure it.

Calculate the cycle time in

Specify in what time unit measure the cycle time will be calculated and displayed.

Don't count weekends

Check this option if you want to exclude the weekends (Saturdays and Sundays) from the cycle time calculation.

Display average line

Check this option if you want the chart to display a vertical line with the average cycle time for the specified time interval.

Display threshold line

Check this option if you want the chart to display a vertical line representing a threshold. The issues that have a cycle time higher than the specified Threshold value will be colored in red.

Display percentile lines

Check this option and enter the values (percents) corresponding to the percentiles to be displayed as vertical lines. A percentile is a value from the data set that splits the data into two pieces: the lower piece contains the percent of the data, and the upper piece contains the rest of the data. For example, the 75% percentile will be displayed as a horizontal line with 75% of the issues under it and the rest of the issues (25%) over it.

Show legend

Check this option if you want the chart legend to be displayed.

Show data table

Check this option if you want a data table to be displayed along with the chart. The Data tab displays the issues along with their cycle time details and the average calculation.

Automatically assign colors

Check this if you want the chart to automatically assign colors for the series.

Custom colors

Select any custom color you want the series to be displayed on by either entering the color's hexadecimal code or picking a color.

You can also use the Copy and Import buttons to copy and import the color configuration to gadgets of the same type.